Proper installation and maintenance are key to long-term system reliability. Shenzhen StarCore Technology provides professional guidance for deploying the XKC-LD002 sensor in wash-down environments.Part 1: Key Installation Points
Sensor Placement:
Trigger Point: Mount inside the tunnel entrance to activate only when the animal is fully inside, preventing premature spray.
Monitoring Point: Mount mid-tunnel to ensure the animal is in the optimal spray zone.
Completion Point: Mount inside the exit to confirm departure and stop the spray cycle.
Mounting Height & Angle:
Height:2.2 - 3 meters above the channel floor to avoid livestock contact while covering the target zone.
Angle: Tilt the sensor axis slightly downward, aimed at the livestock's torso height.
Weatherproofing:
Although the sensor is highly rated (IP67), adding a small splash guard or eave above it is recommended to deflect direct high-pressure spray.
Always use a waterproof junction box for connections.
Part 2: Commissioning & Calibration
Power-On Test: Use the test mode or software to verify the sensor detects a moving target (e.g., a person).
Sensitivity Adjustment: Fine-tune via DIP switches or software based on channel width and animal size to avoid false triggers (birds) or missed detections.
Integration Test: Test the full sequence with sprayers and gates to ensure proper timing.
Part 3: Routine Maintenance
Monthly: Visually inspect for heavy dirt buildup. Wipe clean with a soft cloth.
Quarterly: Check cable connections and waterproof integrity.
Annually: Perform a full functional test.
Note: The sensor does not require periodic recalibration. Its core parameters are factory-set for exceptional long-term stability.
Following this guide ensures your StarCore system delivers reliable service for 10+ years.
