Proper installation is key to optimal sensor performance. This practical guide walks you through installing a Sincreatech capacitive liquid level switch in a plastic water tank. Steps include: 1) Choosing the mounting location away from turbulence, 2) Ensuring the correct air gap between probe and tank wall, 3) Wiring instructions for power, ground, and signal, and 4) Calibration process to set empty/full thresholds.FAQ Section:
Q: My sensor gives a constant "full" signal. What's wrong?
A: Check the probe gap and ensure proper system grounding. Electrical interference from pumps or motors can also cause this.
Q: Can this sensor work on a stainless steel tank?
A: Yes, but you must use our special shielded capacitive sensor designed for conductive tanks.
