1.
Check if the installation area on the tank is flat. 2.
Confirm the wall thickness is within the sensor's range. 3.
Prepare tools: isopropyl alcohol, lint-free cloth, etc.
1.
Surface Preparation: •
Thoroughly clean the area with alcohol. •
Ensure the surface is free of oil, grease, and dust.
2.
Sensor Mounting: •
Metal Tanks: Direct magnetic attachment. •
Non-Metal Tanks: Use specialized adhesive.
3.
Electrical Connection: •
Connect power supply per wiring diagram. •
Provide strain relief for cables.
1.
Power on and check indicator status. 2.
Perform dry/wet calibration. 3.
Record installation parameters.
•
Avoid installation near strong EMI sources. •
Ensure proper grounding. •
Weatherproof the installation if outdoors.
