•
Function: Monitor high and low levels to prevent overflow and pump dry-running. •
Solution: Install SingoCreate Tech's non-contact sensors at the top and bottom of the tank for high/low-level alarms.
•
Function: Monitor the level of waste or leaked electrolyte, alarm when full, prompt for handling. •
Solution: Install single or multiple sensors, also benefiting from the corrosion resistance and maintenance-free advantages of non-contact technology.
•
Function: Assist in judging whether the circulation pump starts normally and if the pipeline is clear. •
Solution: Install sensors at specific pipeline locations to detect the presence/absence of flow.
•
Consistency: The entire system uses sensors based on the same principle, simplifying spares, O&M, and training. •
High Reliability: Every monitoring point possesses the high reliability brought by non-contact technology. •
System Integration: Provides various signal outputs (switch, analog) for easy integration into the main control system.
